Rooppur nuclear plant feeds 350MW into Bangladesh's national grid for the first time
At a glance
- Rooppur's first unit has started a trial supply of 350MW to the national grid.
- It is the first time nuclear power has entered Bangladesh's grid.
- Output will be raised in stages; commercial operation comes later.
Electricity from the Rooppur Nuclear Power Plant has reached Bangladesh's national grid for the first time. On Tuesday 17 November the plant's first unit began a trial supply of 350MW to the grid, according to The Business Standard, The Daily Star, Prothom Alo, Jugantor and Amar Sangbad.
It marks the first time in the country's history that power generated from nuclear energy has flowed into its transmission system. For the plant, built on the bank of the Padma at Ishwardi in Pabna, it is a major step after a long wait.
What happened today
On Tuesday morning, reports said preparations for a trial grid connection of the first unit were complete. The connection was made during the day, and outlets report that 350MW entered the grid in the first stage.
Earlier, project officials had talked of around 300MW at the start, so the first day's supply came in slightly above that estimate.
What "trial" means
A new nuclear unit does not jump straight to full power. During the trial phase, reactor output is raised in steps, and safety, equipment and coordination with the grid are checked at each stage. Today's connection is therefore not the start of commercial operation; it is an important test milestone.
The first unit's full capacity is 1,200MW, so today's 350MW is less than a third of what it is designed to produce.
How Rooppur got here
The first unit has passed several big milestones in recent months:
- Fuel loading: uranium fuel was loaded into the reactor.
- Operating licence: the regulator gave permission to run the first unit.
- First criticality: a controlled, self-sustaining chain reaction began in the reactor for the first time, as World Nuclear News reported.
- Grid connection: today, its electricity went into the national grid for the first time.
The timetable for grid supply had slipped more than once, and one earlier report had even pointed to December. In the end, the connection came in November.
Rooppur at a glance
- Location: Ishwardi, Pabna.
- Total capacity: 2,400MW (two units of 1,200MW each).
- Technology: Russian VVER-1200 reactors.
- Builder: Russia's state nuclear corporation Rosatom.
- Contract value: about $12.65 billion, largely financed by a Russian loan.
- Construction began: 2017.
Why it matters
Much of Bangladesh's electricity still comes from gas, furnace oil and coal, a large share of it imported. Once running at full power, a nuclear plant can provide steady electricity day and night for long periods, known in the power sector as "base load". With both units at full capacity, 2,400MW would be a significant addition to the country's power system.
What happens next
During the trial phase, output from the first unit will be raised step by step. Once the required tests are complete, the unit will move to commercial operation. Work on the second unit is still under way. Priyo News 24 will update this report when official generation figures and the next schedule are announced.
Sources
This report combines coverage from The Business Standard, The Daily Star, Prothom Alo, Jugantor, Amar Sangbad and World Nuclear News.
FAQ
When did Rooppur power reach the national grid?
On Tuesday 17 November 2026 the plant's first unit was connected to the national grid on a trial basis.
How much electricity was supplied?
Several outlets, including The Business Standard and The Daily Star, report that 350MW was fed into the grid in the first stage.
Is this commercial operation?
No. It is a trial connection. Output will be raised step by step, and the unit will move to commercial operation after the required tests.
What is Rooppur's total capacity?
2,400MW from two units of 1,200MW each, built by Russia's Rosatom.
Comments
No comments yet — be the first to comment.